Fixing Frame
|
| |
| 1.Lift the assembled frame into the window opening. Position the frame evenly in the opening using a tape measure and shims or packers. (If fixing into wood proceed to step 4) |
 |
|
Position frame
|
| 2. If you are fixing into a masonry or plastered wall, drill through the frame at each corner using a 3 or 3.5mm drill bit. Make sure the drill bit has touched and marked the plaster behind the frame to indicate where you should drill the fixing holes. |
 |
|
Drill through and mark wall
|
| 3. Remove the frame, drill the wall with a suitable drill bit, insert your wall plugs and reposition the frame as it was before. |
| |
 |
| Insert screws |
| 4. Once the frame is evenly spaced, secure with a screw in the top right hand corner only. The other parts of the frame will be secured later. |
| |
| 5. Once the left side is secured, level the frame in the window and secure the top left hand corner. |
| |
| |
| Step 3 - Hang the shutter panels |
| |
| |
| |
| |
